Connection; Power The Transmitter Omneo - Bosch INTEGRUS User Manual

INTEGRUS
6

Connection

This section gives an overview of typical power and system connections using the INT‑TXO
Transmitter OMNEO.
6.1

Power the Transmitter OMNEO

The INT-TXO can be powered in three different ways:
–
–
–
Connect to DICENTIS Conference System
You need to connect the INT-TXO to the high power output of the DCNM-APS2 (Audio
processor and powering switch), or of the DCNM-PS2 (Powering switch). Use the other output
of the transmitter to connect it to participant devices to optimize the power supply of the
switches.
Bosch Security Systems B.V.
Directly to the DICENTIS Conference system
To a PoE output of a network switch
To a normal output of a network switch, in which case the adapter will power the
transmitter.
User manual
Connection | en 39
2023-01 | V01 |