INTEGRUS
Suspension bracket and mounting plate of LBB4511/00 and LBB4512/00
5
1
2
3
4
5
6
7
Refer also to Attach mounting plate to the suspension bracket, page 33 .
Refer to
–
3.2.1
Charging units
The charging units can recharge up to 56 receivers at once. The charging unit contains the
power supply with automatic mains voltage selection. The charging electronics and a charging
indicator LED are integrated in each receiver. The charging circuitry checks if a battery pack is
present and controls the charging process.
Two versions are available, which are functionally identical:
–
Bosch Security Systems B.V.
3
4
2
Mounting plate: Accessory plate used in case of mounting on a floor stand or of wall-
mounting.
Depending on the way of mounting, install the mounting plate at one or the other side
of the bracket.
Mounting plate hole: Tapped holes to mount the mounting plate.
Radiator hole: Holes for bolts.
Mounting hole: Holes for screws to mount the bracket to the ceiling or on horizontal
surfaces.
Bolt: Bolt to mount the suspension bracket to the radiator.
Screw: Screw to mount the mounting plate to the suspension bracket.
Washer
Attach mounting plate to the suspension bracket, page 33
LBB4560/00 Charger case for 56x LBB4540 for portable systems.
4
User manual
System overview | en
3
5
15
1
2023-01 | V01 |