Cub Cadet XR2 1000 User Manual page 31

Advanced Settings
The Advanced Settings are additional menu options that are not
changed very often.
Press Settings
for 3 seconds
3 second
Use the arrow
to scroll
Press OK to select
the desired setting
Setting Description
P001 Mowing Frequency
Select a higher value for more frequent mowing.
See section 3 below.
P002 Islands On/Off
Escape perimeter islands when searching for the base.
P003 * Near-Wire Following On/Off
Drive to base at a dynamic distances from the lawn's edge to
reduce wheel tracks.
(*) This setting is not applicable to models for lawns under 800 m
60
P001 is displayed
/8600 ft .
2 2
Setting Description
P004* Max Near-Wire Follow Distance
Maximal allowed distance from the edge, when P003 is On.
P005* Min Near-Wire Follow Distance
Minimal allowed distance from the edge, when P003 is On.
P006* Near Wire Follow Test
Test the mower at the max distance set in P004.
P007 Rain Sensor On/Off
Automatically halt operation in rainy weather.
P008 Rain Sensor Sensitivity
Set higher value for higher sensitivity to rain.
P009 Edging On/Off
Enable/disable automatic edge-mowing.
P010 Child Lock On/Off
Lock the keypad to prevent accidental press.
See section 5 further.
P011 Anti-Theft On/Off
Enable and set a 4-digit PIN-code for protection.
See section 5 below.
P012 Anti-Theft PIN-code
Change and confirm new anti-theft PIN code.
See section 5 below.
P013 Base Station On/Off
Set an additional base for a separated zone.
P014 Add Separated Zone
Define a new separated zone and set its area size.
P015 Remove Zone
Delete a separated zone or a sub-zone.
P016 Sound On/Off
Disable operating sounds.
61