Get Started - Cub Cadet XR2 1000 User Manual

Main Zone
Separated Zone
Main Zone
Separated
Sub Zone
Zone
20
Type C
Main Zone + Separated Zone
Your
lawn consists of two or more
zones that are not connected
(separated by a fence, sidewalk,
pathway or other obstacle). The
mower cannot drive between these
zones.
Type D
Main Zone + Sub Zone +
Separated Zone
Some your
areas of lawn are
connected to the Main Zone by a
up to 2 m / 7 ft wide)
narrow pass (
and some areas are totally separated
from the Main Zone by a fence,
sidewalk, pathway or other obstacle,
and the mower can't drive between
them.
Get
Started
Choose locations for the Base Station & Power
Supply unit
The Base Station is where your mower recharges, and where the
Perimeter wire starts and ends. In this installation step, you are
going to determine a proper location for the Base Station.
The Base Station will be installed at a later stage, after the
Perimeter Wire is in place.
TIP
Decide which installation
type is right for you
There are two possible ways to install the Base Station:
Inside the lawn
Internal Installation
At a corner
External Installation
21