Cub Cadet XR2 1000 User Manual page 17

D. Protect Soft Obstacles
Objects such as flower beds, ponds, or small trees must be
protected by setting Perimeter Islands.
Perimeter Wire position
If the distance between an island and the
perimeter wire is lower than 1 m (3.3 ft),
make the obstacle part of lawn's edge.
Set the Perimeter Wire
clockwise around the
obstacle, otherwise
the mower will drive
into the Perimeter
Island or won't be
able to mow the
area around it
properly.
• Wires leading to and from an island should be fastened with
the same peg
• Perimeter Islands should either be rectangular or round
32
Perimeter Wire
Keep min. 1 m (3.3 ft) between
islands; if obstacles are closer
together, use one island
TIPS
Recall Your Lawn Type
Main Zone
Main Zone
Sub Zone
Type A Type B
Main Zone only Main Zone +
Sub Zone
E. How to Wire a Sub Zone
Type B / Type D
Don't have a Sub Zone?
Skip this section!
A Narrow Pass connects
the Main Zone with a Sub Zone.
To allow your mower to drive
through, it should be at least
1 m (3.5 ft) wide:
Main Zone
Main Zone Main Zone
Separ.
Separated Zone Sub Zone
Zone
Type C Type D
Main Zone + Main Zone +
Separated Zone Sub Zone +
Separated Zone
Narrow
Pass
Sub
Zone
Main Zone
33