Seperating Motor Cover And Replacing Oil Line - Echo shindaiwa DCS-1600 Service Manual

29
SAW CHAIN LUBRICATION SYSTEM
DCS-1600

4-5 Seperating motor cover and replacing oil line

[Disassembling]
1. Remove cover and brake lever. (Refer to Sec-
tion 3-2)
2. Remove drum and worm gear. (Refer to Section
4-3)
3. Remove four bolts (W) and front handle.
W
W
4. Remove six bolts (X) (size : M4x16mm length),
X
bolt (Y) (size : M4x20mm length) and three bolts
(Z) (size : M5x20mm length) and seperate motor
cover.
Y
X
Z
5. Remove oil strainer. (Refer to Section 4-1)
6. Remove grommet (H) and oil line (G). If worn,
E
damaged or deformed, replace with new part(s) as
required.
7. Check oil tank vent (E). If blocked with dirt and/
or dust, clean around it.
H
G