5.2.7 Wrap and seal
After inserting the optical fiber, wrap and seal the interface between the optical fiber and the cutting head
with tape.
Notice:
5.2.8 Mount the cutting head on the backplane
The cutting head can be installed on the Z-axis backplane of the machine tool through four screws A, B, C,
and D. When fixing the cutting head on the machine, it must be ensured that the cutting head is locked and there
is no obvious movement.
BLT441T Product Manual
Tape wrap seal
To achieve affective sealing, it is recommended to wrap the
tape at least three times for sealing.
13