Insert The Laser Fiber Interface Into The Cutting Head; Wrap And Seal - BOCI BLT6102H Product Manual

5.2.6 Insert the laser fiber interface into the cutting head

Align the fiber optic plug with the red dot, insert it into the unlocked fiber optic port, and ensure that it is inserted
as far as it will go. Rotate the lock cap until it tightly locked.

5.2.7 Wrap and seal

After inserting the optical fiber, wrap and seal the interface between the optical fiber and the cutting head
with tape.
Notice:

BLT6102H Product Manual
To achieve affective sealing, it is recommended to wrap the
tape at least three times for sealing.
14