Cutting Head Installation; Preparation Before Operation - BOCI BLT441T Product Manual

5. Cutting head installation

During the installation of the cutting head, dust or dirt may accidentally enter the cutting head, contaminate the
optical lens, and affect its normal functions. To prevent dust or dirt from entering the cutting head, please refer
to the following methods for the installation of the cutting head:

5.1 Preparation before operation

The following objects are required before operation:
Cutting head;

Clean workbench (clean workbench type: vertical purification; cleanliness level: ISO 5, 100; average wind

speed ≥ 0.4m/s);

Cleaning kit: strong light flashlight, absolute ethanol (or IPA), dust-free purification cotton swab, dust-free
cloth, compressed air dust removal tank (or air blower).
Purification
Kit
N
otice:
The above operations can only be carried out by personnel who have received

appropriate training and have professional knowledge.
In order to ensure the normal operation of the laser device and the safety of

operators, please be sure to follow the relevant operating instructions.
BLT441T Product Manual
Cutting head
Flashlight
dust-free cloth Compressed air dust removal tank
Ethanol Dust-free cotton swab
9
clean workbench