Clean And Wipe The Fiber Interface Of The Cutting Head; Check The Laser Fiber End Face - BOCI BLT441T Product Manual

5.2.3 Clean and wipe the fiber interface of the cutting head

Wipe the fiber interface of the cutting head with a clean cloth and anhydrous ethanol.

5.2.4 Check the laser fiber end face

Compatible Interface：
Trumpf LLK-Q，IPG HLC-8/LC-8
Compatible Interface：
IPG HLC-16
Remove the protective cap of the laser fiber, and irradiate the end face of the fiber with a strong flashlight to
observe whether there is any pollution; if it is clean, you can directly insert the fiber;
BLT441T Product Manual
Compatible Interface：
Trumpf LLK-D，HIGHYAG LLK-Auto, IPG LCA
Compatible Interface：：
MAX LOE 3.2 ，FEIBO HOC
11
Check the fiber interface end face before insert