Page 50 of 66
Card Specific Loadware Upgrades
BootROM loadware upgrade from an external FTP Server
NTPH13AA_maint
STEP1: The bootROM loadware is placed on an FTP server.
STEP2: Reboot the card and boot into the bootROM load. To enter the
bootROM load, reboot the card and when the card is rebooting, the user will
be prompted to enter "jkl" to gain access to the bootROM.
STEP3: The upgrade is then performed using the following command:
upgradeBoot "<server IP address>", "<userid>", "<password>",
"<path>", "<filename>" <CR>
The <userid> and <password> are those of the FTP server and the <path> is
the path to the file on the FTP Server.
STEP4: When the upgrade function is complete, reboot the card.
This Procedure can not be performed on the VPS Card
!
(NTVQ09AB) platform.
3.01
February 2006
CAUTION!