Cover Removal And Installation - Permobil ROHO AGILITY Active Aluminum Back Series Operation Manual

Cover Removal and Installation

Warnings:
- DO NOT remove or install the cover while the individual is in the wheelchair.
- DO NOT use the product without the cover and foam pad.
- Inspect the cover for damage and replace if necessary.
To Remove the Cover:
1. On the back and bottom side of the shell, pull the
cover flap to release the cover from the fastener
strip.
To Install the Cover:
1. At the top of the shell, slide the attachment flap
through the cover attachment slot. Press the
fastener strip on the shell and the attachment flap
together to secure the cover. Flip the cover over
the top of the shell.
ROHO AGILITY Active Aluminum Back Series Operation Manual
2. Pull the cover away from the shell, releasing it
from the fastener strips on the front side.
2. Fold the cover flap over the top of the shell and
press to fastener circles. Make sure the zipper
side of the cover faces the shell, and press to
attach the cover to the fastener strips on the front
side of the shell.
12
3. Flip the cover over the top of the shell. Release
the attachment flap from the fastener strip. Pull
the flap through the cover attachment slot to
remove the cover.
3. Pull the bottom end of the cover over the bottom
edge of the shell. Press the fastener strip on the
shell and the cover flap together to secure the
cover.