Permobil ROHO AGILITY Active Aluminum Back Series Operation Manual page 7

Hardware Selection Part Two: Outer Cane Clamps
Instructions: Select the correct outer cane clamps. Then, continue with "Hardware Attachment".
1. Measure the diameter of the wheelchair canes. Diameter = "X".
2. Select the correct outer cane clamps.
=
X
1 in. (2.5 cm)
=
X
¾ in. (2 cm)
Note: The ¾ in. (2 cm) outer cane
clamp has a "dimple" next to the
opening for the cane clamp screw.
X ≠
¾ in. (2 cm)
1 in. (2.5 cm)
Note: An image may not be the actual size of the component.
ROHO AGILITY Active Aluminum Back Series Operation Manual
(x2)
dimple
(x2)
If the diameter (X) of the wheelchair back canes does not equal ¾ in. (2 cm) or 1 in. (2.5 cm), ask
your product provider about compatibility.
6
X
X
Top view
T
op view