Enabling Card Slots (Ld 32) - Nortel CallPilot Quick Start Manual

Prompt
FDN
CLS
HUNT
KEY
KEY
4
5
6
7

Enabling card slots (LD 32)

If the MGATE card slots are not automatically provisioned, perform the
following procedure to enable them.
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Response
xxxx
FNA MWA HTA
xxxx
0 SCR xxxx
16 MWK xxxx
Repeat step 3 for each telephone to be configured.
Configure at least two telephones for testing purposes.
To exit the overlay, enter ****.
Connect two telephones to either a phone line or a proper network
connection, depending on the telephone type. Refer to the user
guides specific to the telephones.
Ensure that you have dial tone on both telephones, and check that
you can dial one phone from the other.
Action
Connect to the PBX.
Enter LD 32.
To display the status of the MGATE card, enter STAT n (where n is
the card slot used by the MGATE).
Nortel CallPilot
Quickstart Guide
NN44200-313 01.01 Standard
5.0 11 July 2007
Enabling card slots (LD 32) 29
Notes
For example:
4300
For example:
4300
Where xxxx is the line number
of the telephone. This is the
number dialled or the line
selected when the user makes
a call from the telephone.
For example:
4710
Where xxxx is the CDN of the
CallPilot system.
For example:
4300
—End—