REED PES6H Operating Instructions

Safety Considerations
pressure control situations requiring squeeze-off may involve working in the
vicinity of escaping gas. consider the possibility and potential hazard of static
electricity and observe safety precautions. safety precautions regarding static
electricity generally include performing squeeze-off in a separate bellhole
remote from the blowing gas; applying a wet rag/tape to the pipe surface; and
spraying the area with a fine water mist to conduct the static charge to the
ground; grounding the squeeze-off tool. check the squeeze-off tool prior to use
to assure it is the correct size; is properly functioning; and is properly adjusted
for the squeeze-off to be done.
Prior To Use
Gas service: connect reed's #04619 Grounding Accessory and #04620 static
Discharge Alarm.
*Reed strongly recommends use of the PEGR Grounding Accessory (#04619) with PE Squeeze-Off
Tools. Use a grounding accessory as a precaution against static build-up. Dissipate the charge and
minimize the possibility of ignition.
Additional information on static electricity is available in the A.G.A. Plastic Pipe Manual for
Gas Service, Copyright 2006.
Reed Manufacturing Company
1425 West 8th Street
Erie, PA 16502 USA
Safety Considerations
pressure control situations requiring squeeze-off may involve working in the
vicinity of escaping gas. consider the possibility and potential hazard of static
electricity and observe safety precautions. safety precautions regarding static
electricity generally include performing squeeze-off in a separate bellhole
remote from the blowing gas; applying a wet rag/tape to the pipe surface; and
spraying the area with a fine water mist to conduct the static charge to the
ground; grounding the squeeze-off tool. check the squeeze-off tool prior to use
to assure it is the correct size; is properly functioning; and is properly adjusted
for the squeeze-off to be done.
Prior To Use
Gas service: connect reed's #04619 Grounding Accessory and #04620 static
Discharge Alarm.
*Reed strongly recommends use of the PEGR Grounding Accessory (#04619) with PE Squeeze-Off
Tools. Use a grounding accessory as a precaution against static build-up. Dissipate the charge and
minimize the possibility of ignition.
Additional information on static electricity is available in the A.G.A. Plastic Pipe Manual for
Gas Service, Copyright 2006.
Reed Manufacturing Company
1425 West 8th Street
Erie, PA 16502 USA
PES6H Operating Instructions
polyethylene squeeze-Off tool - 6" Hydraulic
cat. no. pes6H item code: #04312
Over-
squeeze
prOtectiOn
stOp
tie rOD enD
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
www.reedmfgco.com
PES6H Operating Instructions
polyethylene squeeze-Off tool - 6" Hydraulic
cat. no. pes6H item code: #04312
Over-
squeeze
prOtectiOn
stOp
tie rOD enD
Phone: 800-666-3691 or 814-452-3691
Fax: 800-456-1697 or 814-455-1697
www.reedmfgco.com
capacity: 3" - 6"
puMp
reservOir
vALve
sADDLe
cLAMps
1210 #54311
capacity: 3" - 6"
puMp
reservOir
vALve
sADDLe
cLAMps
1210 #54311