Table of Contents
Advertisement
Arduino Interfaces
RESET Button
Physical Characteristics
Firmware Upgrade
Antenna Interface
SMS*
NOTES
1)
1.
Within the operating temperature range, the module meets 3GPP specifications.
2)
2.
Within the extended temperature range, the module keeps the ability to establish and maintain
functions such as SMS and data transmission, without any unrecoverable malfunction. Radio
spectrum and radio network will not be influenced, while one or more specifications, such as P
may undergo a reduction in value, exceeding the specified tolerances of 3GPP. When the
temperature returns to the operating temperature range, the module will meet 3GPP specifications
again.
"*" means under development.
3.
BC95-GR-TE-B_User_Guide
⚫
Upgrades software with QFlash
⚫
The default baud rate is 921600 bps
Connect with STM32 Nucleo-64 development board
Resets the BC95-GR module
Size: (70.0 ± 0.15) mm × (74.0 ± 0.15) mm × (1.6 ± 0.15) mm
Upgrades firmware via Debug UART and DFOTA
Connects to an antenna pad with 50 Ω impedance control
Text and PDU mode
NB-IoT Module Series
BC95-GR-TE-B User Guide
10 / 28
,
out
Advertisement
Table of Contents
