Cable For Automobile (Usb1), Cable For Automobile (Usb2) - Sony XAV-AX5600 Service Manual

XAV-AX5600
3-4.

CABLE FOR AUTOMOBILE (USB1), CABLE FOR AUTOMOBILE (USB2)

Note 1: When installing the USB connector of cable
for automobile (USB1), insert it firmly.
OK
Locked.
USB connector
(CN1701)
1 Remove the cable for
automobile (USB2)
from the lead pin.
front side
bottom side
• Cable for automobile (USB) setting
< Fig. C >
connector
(CN202)
Fix the cable for automobile
(USB2) with the lead pin.
Note 2: Fold the lead pin along
the white line on the
MAIN board.
Lead the cable for automobile
(USB2) along the white line
on the MAIN board.
24
2 Remove the cable for automobile
NG
Unlock.
connector
rear side
(CN202)
front side
– Top view –
rear side
(USB1) from the USB connector
(CN1701). (See Note 1)
1 Remove the cable for
automobile (USB1)
from the lead pin.
USB connector
(CN1701)
OK
Cable for automobile (USB1)
is not blocking the hole.
rear side
hole
– Inner view –
Sony CONFIDENTIAL
For Authorized Servicer
4 cable for automobile
(USB1) (See Fig. C)
3 screw
(PTT2.6 8)
2 Remove the cable for automobile
(USB2) from the connector
(CN202).
4 cable for automobile
(USB2) (See Fig. C)
3 screw
(PTT2.6 8)
MAIN board
Fix the cable for automobile
(USB1) with the lead pin.
Note 2: Fold the lead pin along
the white line on the
MAIN board.
hole
cable for automobile
(USB1)
NG
Cable for automobile (USB1)
is blocking the hole.
rear side
hole
SYS SET