Sony XAV-AX5600 Service Manual page 17

Hide thumbs Also See for XAV-AX5600:
Table of Contents

Advertisement

XAV-AX5600
8. Touch the [Pairing] on the "Bluetooth Connection" screen.
(This unit enters the pairing standby state and the "BT logo"
flashes)
Bluetooth Connection screen
1:01 AM
Bluetooth Connection
OFF
ON
Pairing
Touch the [Pairing]
(Displayed screen in the above figure are example)
9. Operate the BLUETOOTH device to be paired with this unit and
detect this unit.
BLUETOOTH
pairing
10. Select the model name of this unit displayed on the BLUE-
TOOTH device screen to establish the BLUETOOTH connec-
tion.
Note 5: If the model name of this unit is not displayed, try again from step 7.
Note 6: If the connection confirmation display appears, operate the BLUE-
TOOTH device to approve the connection, then touch [OK] on the
unit and the BLUETOOTH device.
Note 7: If passkey input is required on the BLUETOOTH device, input
"0000".
(Passkey may be called "passcode", "PIN code", "PIN number",
"password", etc., depending on the BLUETOOTH device)
XAV-AX5600
11. When the connection is completed, the "mobile phone mark" or
"audio mark" light up.
Bluetooth Connection screen
1:01 AM
Bluetooth Connection
OFF
ON
Pairing
12. Disconnect the BLUETOOTH connection between the BLUE-
TOOTH device and this unit.
Note 8: When the BLUETOOTH connection check is completed, delete the
connection history by referring to "Delete BLUETOOTH connec-
tion history" on the right.
(It can also delete the connection history by performing "INITIAL-
IZATION METHOD" on page 15)
17
"BT logo" flashes
1:01 AM
Pairing Mode
Connect from Bluetooth device.
Cancel
1:01 AM
Pairing Mode
Connect from Bluetooth device.
Cancel
"mobile phone mark" ( )
or
"audio mark" ( )
light up
Delete BLUETOOTH connection history
Note: After completed a BLUETOOTH connection check, be sure to
delete the connection history following the procedure below.
(It can also delete the connection history by performing "INI-
TIALIZATION METHOD" on page 15)
Connection history delete procedure:
1. Press the [HOME] button on the main unit, swipe the bottom of
the home screen to the left, and touch the [Settings] on the touch
panel.
– Lower side of front panel –
Press the [HOME] button
Swipe area
HOME screen
AM
Radio
SXM
Bluetooth
HDMI
Rear Camera
Swipe left
(Displayed screen in the above figure are example)
2. Touch the [Bluetooth] on the "Settings" screen.
Settings screen
Settings
General
Sound
Visual
Bluetooth
Touch the [Bluetooth]
(Displayed screen in the above figure are example)
3. Touch the [Bluetooth Reset] on the "Bluetooth" screen.
Bluetooth screen
Bluetooth
Bluetooth Connection
Bluetooth Device Info
Bluetooth Reset
Touch the [Bluetooth Reset]
(Displayed screen in the above figure are example)
4. Touch the [Reset] on the "Bluetooth Reset" screen will auto-
matically return to the "Bluetooth" screen and the connection
history will be deleted.
Bluetooth Reset screen
1:01 AM
Bluetooth Reset
Bluetooth device information deleted
from receiver.
Cancel
Reset
Touch the [Reset]
(Displayed screen in the above figure are example)
Sony CONFIDENTIAL
For Authorized Servicer
AM
USB port 1
USB port 2
Phone
Settings
Touch the [Settings]
1:01 AM
1:01 AM
ON
1:01 AM
Bluetooth Reset
Reset all settings...
Bluetooth screen
1:01 AM
Bluetooth
Bluetooth Connection
ON
Bluetooth Device Info
Bluetooth Reset
SYS SET

Advertisement

Table of Contents
loading

Table of Contents