Sony XAV-AX5600 Service Manual page 10

XAV-AX5600
7. Check that the sound that stored in the USB device normally
play (Check that the sound output from the speaker).
1:01 AM
XXXXXXXXXXX
XXXXXX
XXXXXX
X
.
(Displayed screen in the above figure are example)
8. Remove the USB device that is connected to the main unit.
9. After completing the check of step 7, press the [HOME] button
on the main unit, and touch the [Settings] on the touch panel.
– Lower side of front panel –
Press the [HOME] button
(Displayed screen in the above figure are example)
10. The "Settings" screen is displayed. Then touch the [General], to
display the "General" screen.
Settings screen
1:01 AM
Settings
General
Sound
Visual
Bluetooth
Touch the [General]
(Displayed screen in the above figure are example)
11. Touch the [down ( u )] on the "General" screen to scroll down,
and touch the [Factory Reset].
General screen
1:01 AM
General
Language English
Demo ON
Date/Time 1-1-2021
Beep ON
Rear View Camera Normal
Touch the [down ( u)]
(Displayed screen in the above figure are example)
10
Sound
check
OFF All
>
00:05 / 03:20
HOME screen
AM
USB port 1 USB port 2 Phone Settings
Touch the [Settings]
General screen
1:01 AM
General
Language English
Demo ON
Date/Time 1-1-2021
Beep ON
Rear View Camera Normal
1:01 AM
General
Steering Control Preset
Driving Position Left Side
SXM Reset
Factory Reset
Firmware Version
Touch the
[Factory Reset]
– Continued on upper right –
12. Touch the [Reset] on the "Factory Reset" screen, the unit auto-
matically restarts and return to the "Initial Setting" screen, and
initialization is complete.
Factory Reset screen
1:01 AM
Factory Reset
Do you really want to restore all settings?
Cancel Reset
Touch the [Reset]
(Displayed screen in the above figure are example)
13. This completes the communication check work.
Sony CONFIDENTIAL
For Authorized Servicer
Initial Setting screen
1:00 AM
Initial Setting
Language English
Demo ON
Set Date/Time 1-1-2021
OK
SYS SET