Sony XAV-AX5600 Service Manual page 16

XAV-AX5600
BLUETOOTH CONNECTION METHOD
Refer to the following procedure when perform a BLUETOOTH
connection with this unit.
Note 1: This unit can only be connected with one BLUETOOTH device at
a time.
Note 2: To disconnect the BLUETOOTH connection, turn the connection
off from either this unit or the BLUETOOTH device.
Note 3: BLUETOOTH pairing is not possible while Apple CarPlay or An-
droid Auto is running.
Connection procedure:
1. Connect the power cord to the regulated DC power supply, and
turn the power on of this unit.
2. Place the BLUETOOTH device to be connected to this unit
within about 1 m on this unit.
within
about 1 m
3. Touch the [OK] on the "Initial Setting" screen, the screen chang-
es to the "For your safety" screen and then the home screen is
displayed.
Initial Setting screen
1:00 AM
Initial Setting
Language English
Demo ON
Set Date/Time 1-1-2021
OK
Touch the [OK]
(Displayed screen in the above figure are example)
16
Regulated DC
power supply
+
–
stand, etc.
stand, etc.
For your safety screen
1:00 AM
For your safety:
Do not watch and operate the unit while driving.
Follow your local traffic laws and regulations.
Close
– Continued on upper right –
4. Press the [HOME] button on the main unit, swipe the bottom of
the home screen to the left, and touch the [Settings] on the touch
panel.
– Lower side of front panel –
Press the [HOME] button
Swipe area
HOME screen
AM
Radio SXM Bluetooth HDMI Rear Camera
Swipe left
(Displayed screen in the above figure are example)
5. Touch the [Bluetooth] on the "Settings" screen.
Settings screen
Settings
General
Sound
Visual
Bluetooth
Touch the [Bluetooth]
(Displayed screen in the above figure are example)
6. Touch the [Bluetooth Connection] on the "Bluetooth" screen.
Bluetooth screen
Bluetooth
Bluetooth Connection
Bluetooth Device Info
Bluetooth Reset
Touch the [Bluetooth Connection]
(Displayed screen in the above figure are example)
7. Touch the [ON] on the "Bluetooth Connection" screen.
(The BLUETOOTH signal turns on and the "BT logo" light up
on the status bar of this unit)
Note 4: This step is not necessary if [ON] is already selected. Please go to
step 8.
Bluetooth Connection screen
1:01 AM
Bluetooth Connection
OFF
ON
Pairing
Touch the [ON]
(Displayed screen in the above figure are example)
Sony CONFIDENTIAL
For Authorized Servicer
AM
USB port 1 USB port 2 Phone Settings
Touch the [Settings]
1:01 AM
1:01 AM
OFF
"BT logo" light up
1:01 AM
Bluetooth Connection
OFF
ON
Pairing
– Continued on next page –
SYS SET