Loading The Dishwasher - Kenmore 630.1230 Series Use & Care Manual

Do not pre-wash items that have loosely attached soiling. Re-
move large food particles, bones, seeds, toothpicks, and exces-
sive grease. Items having burned-on, baked-on or starchy soils
may require pre-treatment.
Refer to the Dishware Materials section for more information
about dishware suitability.
• Load only dishwasher-safe items into the dishwasher.
• Load dishes in the dishwasher racks so that the insides of
bowls, pots and pans are facing the spray arms.
• Avoid nesting and contact points between dishes.
• Separate items of dissimilar metals.
• Load dishes and glasses at an angle to avoid puddling and
improve drying performance.
To avoid dishwasher damage, do not load the dishwasher
with paper products, plastic bags, packing materials, or
anything other than normal, dishwasher-safe dishware and
kitchenware.
TOP RACK -SUGGESTED LOADING PATTERN
TOP RACK - ADDITIONAL LOADING PATTERN

LOADING THE DISHWASHER

NOTICE
Loading the Top Rack
NOTE: Ensure items do not protrude through the bottom of the
racks and block the spray arms.
NOTE: When pushing the top rack into the dishwasher, push it
until it stops against the back of the tub so the top rack spray
arm will connect to the water supply at the back of the tub. Do
not push the top rack with the door.
Loading the Bottom Rack
Place large items in the bottom rack. Load pots, pans and bowls
with the dirty surfaces facing the spray arms.
Unloading Sequence
• Unload the bottom rack first.
• Unload the silverware basket.
• Unload the top rack.
NOTE: Do not use rubber bands (to hold items in place in the
racks) or any other after market parts in your dishwasher. The
use of such items could potentially damage the drain pump.
BOTTOM RACK -SUGGESTED LOADING PATTERN
BOTTOM RACK - ADDITIONAL LOADING PATTERN
11