4.
Reinstall the covers on both units, securing them in place with the screws removed in
step 2.
5.
Reinstall both units in their racks or other installation option (see
Transmitter or Receiver
6.
If you are using shielded cable, disconnect the cable shield from the connector at
either end of the cable.
7.
Obtain a second 12 V power supply (one supply is provided with the transmitter and
normally powers both units), and locally power both units (see
on page 7).
DTP DVI 4K 330 Transmitter and Receiver • Reference Information
on page 10).
Mounting the
Power supply wiring
13