Design And Operating Principle - Vents VSK 315 2D User Manual

DESIGN AND OPERATING PRINCIPLE

The fan casing is made of an aluminium frame fastened with aluminium corners and removable heat- and sound-insulated double-layer
panels made of aluzinc.
Thanks to its corrosion-resistant aluzinc casing and heat-insulation material, the fan is suitable for outdoor installation.
The VSK fan is equipped with an asynchronous motor with an external rotor and a centrifugal impeller with backward curved blades.
The fan has a special design that allows you to change the position of the side panels for air supply in directions at an angle of 90°.
Frame
Panel
When connecting the fan to the air duct system, it is recommended to use the accessories specified in the User's manual.
Connecting spigots, which also serve as vibration damping inserts, can be of square or round cross-section.
Spigots of round cross-section are equipped with rubber seals.
Connecting spigots are not included in the delivery set, they are ordered separately.
www.ventilation-system.com
Terminal box
Motor
9