Dp Connector Dp2; Usb-C Upstream Connector Usbc1 - HP E24u G5 Maintenance And Service Manual

2) Lift the DP connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

DP connector DP2

Repair the Mini DP connector:
1) Use a hot air gun to melt the solder on the pins from bottom side.
2) Lift the Mini DP connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

USB-C upstream connector USBC1

Repair the USB-C connector:
1) Use a hot air gun to melt the solder on the pins from bottom side.
2) Lift the USB-C connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component
17