Hdmi Connector Hdmi1; Dp Connector Dp1/Dp2; Usb-C Connector Usb1 - HP E27u G4 Maintenance And Service Manual

HDMI connector HDMI1

Repair the HDMI connector:
1) Use a soldering iron to remove as much solder as possible from the pin.
2) Lift the HDMI connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

DP connector DP1/DP2

Repair the DP connector:
1) Use a soldering iron to remove as much solder as possible from the pin.
2) Lift the DP connector from the PCB.
3) Place the new component on the PCB. Be sure that it matches the PCB footprint.
4) Solder the new component.

USB-C connector USB1

Repair the USB-B connector:
1) Use a soldering iron to remove as much solder as possible from the pin.
15