Special Tools; Recommended Set Of Metric Tools - Philips CSM 66 III Preinstallation Manual

26
Lubricants/Oils and Lubricants/Oils

8.2 Special Tools

8.2.1 Recommended Set of Metric Tools

QTY: DESCRIPTION:
1 Open end/ring wrench 5 mm
1 Open end/ring wrench 5.5 mm
1 set Open end/ring wrenches 6 - 22 mm
1 Socket screwdriver 4 mm
1 Socket screwdriver 5 mm
1 Socket screwdriver 7 mm
1 Socket screwdriver 8 mm
1 Socket screwdriver round-head 2.5 mm
1 Socket screwdriver round-head 3 mm
1 Socket screwdriver round-head 4 mm
1 Socket screwdriver round-head 5 mm
1 set Allen keys 1.5 - 10 mm
1 set Allen wrenches (short)
1 set TORX right-angled screwdrivers
1 Screwdriver no. 1 insulated
1 Screwdriver no. 2 insulated
1 Screwdriver no. 3 insulated
1 Screwdriver no. 4 insulated
1 Screwdriver no. 5 insulated
1 Screwdriver no. 4 short
1 Screwdriver no. 4 square
1 Screwdriver clamping M2 - M3.5
1 Screwdriver clamping M3.5 - M5
1 set Screwdriver Boley
1 Phillips screwdriver no. 0
1 Phillips screwdriver no. 1
1 Phillips screwdriver no. 2
1 Measuring tape 2 meter
1 Calliper gauge 150 mm
1 set Feeler gauges 0.03 - 0.5 mm
1 Spring-pressure gauge 100 - 1000 N
Pre-installation Manual CSM 66/84/84V III
PA 1306/40 /50 /60 /61
and Special Special Tools Tools
5322 871 63303
96.00