Chapter 6 Storage, Transport & Unpacking Of Crated System - Philips CSM 66 III Preinstallation Manual

CHAPTER 6 6 Storage, CHAPTER
5322 871 63303
96.00
Storage, Transport Storage, Transport & & Unpacking
Storage, Transport
The space required to temporarily store a crated system can be derived from
the data given in Section 2.3. The most important environmental conditions for
storage and transport of the crated system is given below:
Temperature:
Relative humidity:
Vibration:
Bump
Storage
Unpacking is restricted to Philips engineers. For unpacking, the following tools must
be available at the customer's site:
anti-clockwise mains or pneumatic screwdriver,
crosshead bits for screwdriver,
open-ended spanner M24 (width 36 mm).
Pre-installation Manual CSM 66/84/84V III
PA 1306/40 /50 /60 /61
Unpacking of of Crated
Transport & & Unpacking Unpacking of of Crated
-25 to +55 °C (<70 °C for a period of 24 hours).
5 to 90% (No condensation. Before unpacking, leave
the system in the crate for a minimum of 1 day for
acclimatisation purposes.).
10 to 55 Hz 0.6 mm peak to peak.
< 10 g for 6 ms.
sheltered area.
Crated System System
Crated System System
19