Troubleshooting; Maintenance - Accora Configura Lite Medium Instruction Manual

How to use the handset -
®
Configura Medium
4
The handset has two buttons to control the
adjustment of the chair. The left hand button returns
the chair from a reclined position and then lifts the
chair. The right hand button returns the chair from the
lifted position and then tilts the chair into a reclined
position.
How to use the handset -
Configura ® Small
5
1
2
3
Version 1
Button 1 – back up, footrest down, chair rises
Button 2 – chair lowers, footrest up back down and
tilts back
Button 3 – key lock
Always warn the user before changing the position of
the chair.

Maintenance

Warning: Ensure chair is disconnected from the
power supply before starting any service work.
Ensure the chair is on a stable surface and no-one
can attempt to use the chair.
© Accora Configura® assessment helpline: 01223 206110 | configura@accora.uk.com | www.configura.uk.com
1 2
Version 2
The chair should be serviced every 12 months by a
competent engineer with electrical and mechanical
skill. The key points for servicing are:
1. Ensure all moving parts are lubricated at relevant
points.
2. Ensure all electrical cables are not frayed or
trapped by moving parts.
3. The chair is stable and on a level surface.
A full parts and accessories list is available on request.

Troubleshooting

Occasionally the chair may stop working.
Some possible reasons for this are:
1. Power supply. Please try another power source.
2. Connections to the transformer. The cables to the
transformer can become disconnected. Please
ensure these are connected correctly.
3. Handset cord damaged. If the handset cord is
showing signs of damage, stop using the chair
immediately and call your authorised provider.
Pressure
6
The Configura ® Lite has an optional Visco foam
overlay with vapour permeable and waterproof black
breathable fabric. This could be useful for user pressure
reduction and comfort. The overlay comprises the
fabric section of the seat base and the footrest. This is
removable for cleaning and replacing. It is fixed with
Velcro on the underside of the seat base and Velcro
straps that attach to the footrest.
To remove, carefully pull the overlay away from the
seat box, starting in one of the corners underneath
the backrest cushions as shown in fig 5.
Keep pulling the seat base part of the overlay until it
is removed completely.
There are flaps which attach around the footrest.
5