Discardd Command; Dnsproxyd Command - Nortel BayStack 100-S Reference
Reference for the baystack instant internet remote access commands version 7.11
Hide thumbs
Also See for BayStack 100-S:
- Using manual (344 pages) ,
- Install manual (104 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
Example
ii> dhcpd
DHCP Server is enabled
Lease period: 259200 seconds
DNS Server: 10.116.116.1
Scope name: net
Subnet: 10.116.116.0
Range:
10.116.116.1-10.116.116.254
Total addresses in Scope: 254
exclude: 10.116.116.1-10.116.116.2
10.116.116.3
dhcpd scope net 10.116.116.1 10.116.116.254 255.255.255.0 10.116.116.1
dhcpd exclude 10.116.116.1 10.116.116.2
dhcpd lease 259200
dhcpd dns 10.116.116.1
dhcpd start
discardd command
The
discardd
facility that accepts TCP connections on port 9 and discards all incoming data.
discardd start | stop
Example
ii> discardd start
dnsproxyd command
The
dnsproxyd
service.
dnsproxyd start | stop
Example
ii> dnsproxyd start
Reference for the BayStack Instant Internet Remote Access Commands Version 7.11
Chapter 2 Using configuration commands
Mask: 255.255.255.0
0000AABBCCD8
07/17/98,19:49:45
command starts or stops the discard service. This is a diagnostic
command starts or stops the Domain Name Server (DNS) proxy
Router: 10.116.116.1
Available: 251(99%)
65
Advertisement
Table of Contents
