Nortel BayStack 100-S Reference page 35

Table 6 filter command options (continued)
Option
source
destination
insert
drop
Note: If you need to add or modify a large number of filters, use Setup.
Example 1
filter inet deny ip source 10.0.0.0/24
Discards IP packets with a source address from 10.0.0.0 to 10.0.0.255.
Example 2
filter inet allow ip dest 10.0.1.99
Allows IP traffic destined to 10.0.1.99.
Example 3
filter inet allow ip dest 10.0.0.0/24
Allows IP traffic with a destination address from 10.0.0.0 to 10.0.0.255.
Reference for the BayStack Instant Internet Remote Access Commands Version 7.11
Chapter 2 Using configuration commands
Definition
Specifies matching criteria of source IP address, source port, or both.
address - Specifies the address you want to allow or deny.
- Specifies the optional subnet mask of the IP address that
bits
you want to allow or deny.
ports - Specifies the port number(s) that you want to allow or
deny.
Specifies matching criteria of destination IP address, destination port,
or both.
address - Specifies the address you want to allow or deny.
- Specifies the optional subnet mask of the IP address that
bits
you want to allow or deny.
- Specifies the port number(s) that you want to allow or
ports
deny.
Inserts the filter at the beginning of a list.
Drops the specified filter from a list.
35