Nortel BayStack 100-S Reference page 41

Table 10 ifconfig command options (continued)
Option
ipaddress
mtu
outfilter
transparent
update
xlate
Reference for the BayStack Instant Internet Remote Access Commands Version 7.11
Chapter 2 Using configuration commands
Definition
Sets the interface's IP address and netmask.
ipadr - The IP address to be used for the specified interface.
- The netmask to be used for the specified interface.
netmask
Sets the Maximum Transmission Unit (MTU) for a packet.
(default: 1500)
The number of bytes.
size -
Sets the output filter applied to outgoing traffic.
filterlist - An arbitrary name of the filter list.
- Clears the outfilter command.
clear
When transparent
interface is redirected to the transparent Web cache.
(default: off)
When update is on, the unit notifies a dynamic DNS server of the
new address for a domain name.
name - The domain name with the suffix.
ipadr - The IP address of the dynamic DNS server.
When is on, the source address of traffic received on the
xlate
specified interface is translated to the address of the eventual
outbound interface. This option is most often used to hide IP
addresses. Address translation can be specified for input or output.
(default: off)
on - Turns address translation on.
in - Specifies to translate when received.
out - Specifies to translate when sent.
- Turns address translation off.
off
is on, all Web traffic received on the specified
41