Vemer Tuo Wi-Fi RF Bianco User Manual page 27

TIMER MENU - TIMING SETTING
Set a timing for temperature regulation to prolong the current operation.
There are 3 timings available:
• Timed manual: set a time delay during manual operation to maintain this
operation until timing has elapsed.
At the end of the timing, the device activates the automatic operation.
• Timed automatic: set a timing during the automatic operation to maintain this
operation until the timing has elapsed.
At the end of the timing, the device activates the off operation
• Off timed: set a timing during off operation to maintain this operation until timing
has elapsed. At the end of the timing, the device activates automatic or manual
operation, depending on which operation was active before switching off.
How to set a timing
Initial screen
To exit the timing change:
• press the key
• press the key
When a timing is in progress, the symbol
Note: to cancel a timing in progress or to exit without activating the timer, set 00'.
Note: the timing ends in the case of changes to the operating mode.
3s
SET
Menu configuration
Set the timing. Increments of:
- 15 minutes (') for timings up to 24 hours
- 1 hour (h) for timings from 1 to 5 days (d)
- 12 hours for timings from 5 to 99 days
once to return to the configuration menu
twice to exit the menu and return to the initial screen
TUO Wi-Fi RF Chronothermostat with humidistat User Manual
x5 times
is lit.
- 69 -
TIMER menu