Table of Contents
Advertisement
How to customize the profile of a Px program
Choose the
PX program
• starting from midnight 00:00, press the keys
of the day one of the 3 possible temperatures (T1, T2, T3) and the key
to confirm and go to the next hour.
• to enter a switching delay for the selected hour, hold down the key
for a long time.
For more information about switching delay, see "How the switching delay works"
When the profile program is suitable for your needs:
• press the key
How the switching delay works
Set a switching delay for a specific hour to maintain, for the duration
of the delay, the temperature value assigned to the previous hour.
For example, if the program includes:
T2 from 12 to 13
T3 from 13 to 14 pm with 30 minutes delay
the chronothermostat adjusts the temperature based on the value of
T2 from 12 to 13.30 and
T3 from 13.30 to 14.00
It is possible to set delays of 15, 30, 45 minutes, independent
for every hour of the day.
The switching delay for programming the MEV follows a similar behavior
Choose the temperature
for the selected time
to exit the customization.
TUO Wi-Fi RF Chronothermostat with humidistat User Manual
and
to assign to each hour
- 65 -
Choose the temperature
for the next hour
Advertisement
Table of Contents
