Table of Contents
Advertisement
de
Home Connect
Hints
If the Smart Energy system (energy
■
manager) does not start your device,
the program will still be started before
the set time has elapsed.
The program ends when the time
period expires.
Remote start and so too FlexStart
■
are deactivated for security reasons
under the following conditions:
- Press Start / Reload.
- Open door.
- Press # to switch off the device.
- Power failure.
Became FlexStart deactivated, remains
M. Completed inN still activated.
Adding or removing laundry afterwards:
A notice:
Became FlexStart already active
fourth and the program has not yet
started, you can add or remove laundry
1.
on Start / reload to press.
2.
Open door.
3.
Add or remove laundry.
4th
Close the door.
5.
on Start / reload to press.
6th
on Remote start} to press. the
FlexStart is now activated and the device
is waiting for remote start via the Smart
Energy system (energy manager).
Intelligent program
recommendation
After you have washed your laundry in the
washing machine, a suitable program for
drying the laundry is recommended on
the dryer.
36
The expected program duration of the
recommended program is determined on
the basis of your previous washing
program.
In order to determine an optimal drying
program, your devices must transmit and
receive information.
Therefore, please note the following:
The wash program must be
■
completed in order to transfer the
data.
The washing machine must be
■
Home Connect capable.
The washing machine and dryer must
■
be connected to the home network
and registered in your Home Connect
app.
1.
Turn on a device.
2.
Program on intelligentDry È
to adjust.
The analysis starts and an animation
appears on the display.
3.
To cancel the analysis, set another
program or switch off the device. If the
suitable program has been found, the
animation stops, the LED of the
recommended program lights up
continuously and program information is
shown in the display.
4th
on Start / reload to press.
A notice:
If no suitable program could be
found, a signal sounds and the following
appears in the display: {{{
Please pay attention to the following:
No suitable drying program found for
■
the selected washing program.
The washing machine and dryer must
■
be connected to the home network
and registered in your Home Connect
app.
Check whether your devices are within
■
range of the home network.
Advertisement
Table of Contents
