Table of Contents
Advertisement
de
Device care
8th.
Push in the condensation
container until it clicks into place.
9.
on Start / reload to press.
Device care starts and a signal sounds.
After about 3 hours, the appliance pauses
appliance maintenance and the remaining
program duration flashes in the display.
10.Pull out the condensate container
horizontally and empty it.
11.Fill approx. 1 ^ liter of warm tap water
into the condensation container.
A notice:
Always hold the filled
condensation container horizontally so
that no liquid leaks out.
46
12thCarefully swivel the condensate
container horizontally and empty it to
rinse out any residues of the original
care product.
13thFill approx. 1 ̂ liter of warm tap
water into the condensate
container again.
14thPush in the condensation
container until it clicks into place.
15thon Start / reload to press.
Device maintenance is continued. Appears in
the display"Ÿš at the end of the device
maintenance and a signal sounds.
16.Empty the condensate container again.
Advertisement
Table of Contents
