Step 3
Push the WOOD DOWELS (3) into the exact hole shown in
◆
the UPRIGHTS (E and F).
Fasten the LEFT MOLDING (K) to the LEFT UPRIGHT (E).
◆
Fasten the RIGHT MOLDING (L) to the RIGHT UPRIGHT (F).
◆
Use four 1-3/8''mm Pan Head Screws.
◆
NOTE: You should align each SCREW to the holes before completely
◆
tightening any of them.
Page 8
9
1-3/8" PAN HEAD SCREW
(4 used in this step)
WOOD DOWEL
(2 used in this step)
FP4