Step 8
Push the WOOD DOWELS (3) into the exact hole shown in
◆
the UPRIGHTS (E and F) and the ENDS (C and D).
Fasten (B) to the ENDS (C and D), UPRIGHTS (E and F).
Use eight 1-3/8 " PAN HEAD SCREWS (9).
◆
NOTE: You should align each SCREW to the holes before completely
◆
tightening any of them.
9
1-3/8" PAN HEAD SCREW
(8 used in this step)
FP4
WOOD DOWEL
(4 used in this step)
Page 13