Opticon OPN2005 Quick Start Manual page 2

Quick Start Instructions
0
Step 1 - Scan Bluetooth Mode
Scan the Bluetooth Default barcode that matches the connection
1
method you wish to use,
If you enable the
2
ENABLE barcode, you will also be able to toggle the on-screen
keyboard of an iOS device by tapping the Clear/Function key.
3
Step 2 - Hold Clear/Function Key for 5 seconds
Hold the OPN2005's Clear/Function key for 5 seconds until it
beeps and begins to flash blue. The OPN2005 is now discoverable
4
by your host device. This can be cancelled at any time by holding
the Clear/Function key for another 5 seconds.
5
Step 3 - Perform Bluetooth search on host
Use the Bluetooth interface on your host device to search for and
6
select the OPN2005. The OPN2005 will beep and the LED will flash
blue slower than before indicating pairing was successful. If you
are pairing in Bluetooth-SPP mode, the OPN2005 will complete the
7
pairing process as soon as you launch an appropriate application
and open the serial port created by your Bluetooth software.
8
For information about your OPN2005, including detailed setup
instructions, downloads and more, visit us at:
9
END
HID (recommended) or SPP.
iOS Keyboard Toggle
www.opticonusa.com/start/opn
feature by scanning the