Replacing Tracks - Polaris FREEDOM EB37 Series Owner's Manual

ENGLISH
2. Separate the edges of the brush and undo the
tabs. Remove the worn brushes.
2
Figure 24. Undo the Tabs of the Brush
3. To install the new brush, position the new
brush on the roller with the cleaning blades
facing away from the roller.
3
Figure 25. Install the New Brush
4. Thread each tab into the slot provided and
gently feed it through until the heel comes out
at the other side of the slot.
4
Figure 26. Pull Tabs Through Each Slot
Page 16
Polaris FREEDOM
® ™
5. Use a pair of scissors to cut the tabs 3/4 inch
from the heel so that they are no higher than
the cleaning blade.
6. Repeat the procedure to install the second
brush.
Figure 27. Cut Tabs
6.5

Replacing Tracks

1. Pull on the inside of the old track to remove
the track lip from the front wheel.
Figure 28. Pull the Old Track Over the Wheel
Cordless Robotic Cleaner | Owner's Manual