Polaris FREEDOM EB37 Series Owner's Manual page 11

Polaris FREEDOM Cordless Robotic Cleaner | Owner's Manual
® ™
Figure 12. Secure the Hook
3. Pull up the cleaner by the handle and hold
vertically to let the water drain into the pool.
Figure 13. Drain the Cleaner
4. Charge the cleaner on the charging station out
of direct sunlight.
Figure 14. Store the Cleaner
NOTE: For best results, dry the cleaner and base
charging contacts before charging. Periodically
clean the charging contacts. See maintenance
section.
3.4.2 Waterline Retrieval
1. At the end of the cleaning cycles (other than
Floor Only), the cleaner climbs and waits at
the waterline.
2. If the cleaner is not retrieved after 30 seconds,
it moves to a different wall.
3. If not retrieved after 10 minutes, the cleaner
returns to the pool floor for retrieval with the
hook and pool pole.
4. If connected to the iAquaLink
receive push notifications to your mobile
device alerting you to remove the cleaner.
5. Remove cleaner at the waterline by using the
handle and it will expel water to make it lighter.
Figure 15. Remove the Cleaner
ENGLISH
app, you will
®
Page 11