Care And Maintenance; Troubleshooting - Norcent LM560 Manual

Care and Maintenance

Care
Avoid exposing your monitor from direct sunlight or other heat source. For
better performance and glare reduction please place your monitor away from
the sun.
Put your monitor in a well ventilated area. Do not place heavy things
on top of your monitor.
Make sure that your monitor is installed in a clean and moisture-free area.
Keep your monitor away from magnets, motors, transformers, speakers, and
TV sets.
Note:
1. Remove the LCD monitor from its package and please remember to take
off the plastic bag and Polystyrene Foam. (Please store the original
packaging material for future use).
2. Adjustable screen angle is 1
leaning backward. For packing, please remember to use more force to
bend backward but not to exceed 20 º degree range and please make sure
to store the monitor into the original package.
Caution: Panel exceeding -1
harms will be unpredictable.
Safety Tips:
If you see smoke, hear abnormal noise or smell odor coming out of your
monitor, be very cautious to remove the power cord immediately and call
your service center.
Never remove the rear cover of your monitor. The display unit contains
high-voltage parts and may cause electric shock to human bodies.
Never try to repair the monitor yourself. Always call your service center or
a qualified technician to fix it.

Troubleshooting

No power
Make sure A/C power cord is securely connected to the power outlet and the
power cord is firmly connected to the monitor.
Plug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
Power on but no screen image
Make sure all signal cables are installed.
Make sure the video cable supplied with the monitor is tightly secured to the
video output port on back of the computer. If not, tightly secure it.
Adjust brightness.
º
degree leaning forward and 20
º º
to +20 degree is considered unsuitable and
12
º
degree