First Setup - Norcent LM560 Manual

First Setup

Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories:
Attached video Cable (15 pin D-SUB)
Power Cable
Audio Cable
User Guide Book
Quick Installation
1. Connect video cable
Make sure both the monitor
and computer are powered
OFF. Connect the video cable
to the computer.
2. Connect power cord
Connect the power cord to a
properly grounded AC outlet,
then to the monitor.
3. Power-ON computer and
monitor
Power-ON the computer, then
Power-ON the monitor.
4. Windows users : Setting the
Timing Mode (Resolution and
Refresh Rate)
Example: 1024 x 768 @ 60 Hz
Resolution Right-click on the
Windows desktop > Properties >
Settings > "Desktop Area". Set
the resolution.
Refresh Rate (vertical frequency)
See your graphic card's user
guide for instructions.
2