Table of Contents
Advertisement
Care and Maintenance
Care
Please avoid exposing your LCD monitor from direct sunlight or other heat
sources.
Put your monitor in a well ventilated area. Do not place any heavy things
on top of your monitor.
Make sure your monitor is installed in a clean and moisture-free area.
Keep your monitor away from magnets, motors, transformers, speakers,
and TV sets.
Note:
1. Remove the LCD monitor from its package and remember to take off the
plastic bag and Polystyrene Foam.
2. Pull the base from Parallel versus Panel to Vertical.
3. Adjustable screen angle is 0 degree leaning forward and 25 degree
leaning backward. For packing, please bend harder to exceed 20 degree
backward in order to reduce storage size. Caution: Panel exceeding 0 to
+25 degree is considered unsuitable and harm will be unpredictable.
Safety Tips:
If you see any smoke, hear any abnormal noise or smell any odor coming out
from your monitor, be very cautious to remove the power cord immediately
and call your service center.
Never remove the rear cover of your monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
Never try to repair your monitor yourself. Always call your service center or
a qualified technician to fix it.
Troubleshooting
No power
Make sure A/C power cord is securely connected to the power outlet and the
power cord is firmly connected to the monitor.
Plug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
Power on but no screen image
Make sure all signal cables are installed.
Make sure the video cable supplied with the monitor is tightly secured to the
video output port on back of the computer. If not, tightly secure it.
Adjust brightness.
14
Advertisement
Table of Contents
