Connection Diagram; Set Up The Camera - ZOSI C296 Quick Start Manual

Connection Diagram

Before initial setup, follow the steps below to connect the camera.
1. Connect the camera to the LAN port on your router with an Ethernet cable.
2. Use the provided power adapter to power on the camera.
Router
NOTE: For PoE PT cameras, you can also connect the camera to a PoE
switch/injector or Zosi PoE NVR. (PoE switch/injector and Zosi PoE
NVR are not included)
For WiFi PT cameras, you can connect to the router via Ethernet cable or directly
connect to WIFI for device connection.

Set up the Camera

Download and launch the Zosi Smart App
or client software and follow the on-screen
instructions to complete the initial setup.
· On Smartphone
Scan to download Zosi Smart App.
· On PC
Download: https://www.zositech.com/pages/app.
NOTE:
If you are connecting the PoE camera to a Zosi PoE NVR, please set up the
camera via the NVR interface.
If you are setting up a WiFi PTZ camera, you need to follow the on-screen
instructions to complete the WiFi configuration first.
Network Cable
PT Camera
Power Cable
App video operation link
Power Adapter
English 4