4. Troubleshooting
4-2 Electrical Malfunction
Troubleshooting (PCB failure)
PCB Failure
- Check the input voltage of
PCB SMPS (input check-
point : 120V )
OK
- Check the output voltage of
PCB SMPS (Output check-
point : 5V/12V )
OK
Do all relays operate?
OK
Check the Assy-Inverter Module & Assy Touch PCB's
input voltage(5V,12V,GND)
OK
Replace PCB
This document can not be used without Samsung's authorization.
- Check Terminal block
voltage(240V).
Reset the circuit braker or
check main power.
Repair the relay or replace
39
OK
Replace PCB
PCB.
Replace or Repair the wiring
Repair Faulty wiring
or PCB check