Samsung NE59J7630SS Service Manual page 14

3. Disassembly and Reassembly
3-4 Removing Surface elements and The Ceramic Glass Cooktop
Parts
Surface
elements and
Ceramic Glass
Cooktop
* Reassembly of All part is the reverse order of disassembly.
Screw
- Terminal Block Screw : M4 X 25
- Regulator Screw : M4 x 10 (STS, Machine)
- The others : M4 X 10.
This document can not be used without Samsung's authorization.
Explanation Photo
14
Explanation
4. Protect the cooktop surface and turn the
assembly over.
5. To remove the surface elements
a) Remove the wires from the element
and limiter terminals.
b) Remove the element bracket screw
(shown above) for the element you
are servicing.
c) Carefully lift the bottom of the
bracket just far enough to remove
the element.
d) Use sharp tool to remove the heating
element.
REASSEMBLY NOTE: When you reinstall
the element make sure that the wires
are inserted onto the correct terminal
then reinstall the bracket screw to
secure it to the cooktop.