Create Access Point Groups; Packet Data Access Points - Nokia N97 User Manual

Connection name
●
connection.
Data bearer — Select the data connection type.
●
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined
fields can be left empty, unless your service provider
has instructed otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for
your SIM card.

Create access point groups

Select Menu Settings
>
Destinations.
Some applications allow you to use access point groups
for network connections.
To avoid selecting a single access point every time the
device makes a network connection, you can create a
group that contains various access points to connect to
that network and define the order in which the access
points are used.
For example, you can add wireless LAN (WLAN) and
packet data access points to an internet access point
group, and use the group for browsing the web. If you
give WLAN the highest priority, the device connects to
the internet through WLAN, if available, and through a
64
packet data connection if not.
— Enter a name for the
or with a red *. Other
and Connectivity
>
To create a new access point group, select
Manage New destination.
>
To add access points to an access point group, select
the group and Options
an existing access point from another group, select the
group, tap the relevant access point if it is not already
highlighted, and select Options
to other dest..
To change the priority of an access point within the
group, select Options
>
priority.

Packet data access points

Select Menu Settings
>
Destinations Access
>
instructions on the screen.
To edit a packet data access point, open one of the
access point groups, and select an access point marked
with .
Follow the instructions from your service provider.
Select from the following:
Access point name — You obtain the access point
●
name from your service provider.
User name — The user name may be needed to
●
make a data connection, and is usually provided by
your service provider.
Options
New access point. To copy
>
Organise
> >
Organise Change
>
and Connectivity
>
point, and follow the
>
Copy