Still Image Camera Settings - Nokia N81 User Manual

Still image camera settings

There are two kinds of settings for the still image camera:
active toolbar settings and main settings. To use active
toolbar settings, see 'Adjust color and lighting', p. 59. The
active toolbar settings return to the default settings after
you close the camera, but the main settings remain the
same until you change them again.
Select Options > Settings
quality for different purposes, select the album where to
save the images, view the captured image after it has
been taken, use digital zoom, select the capture tone,
select the memory for saving the images or restore the
default settings.
To change the main settings, select
and from the following:
Image quality— Print 2M - Large
resolution), Print 1M - Medium
MMS 0.3M - Small
print the image, select
Medium. To send the image through MMS, select
0.3M - Small.
These resolutions are only available in the main camera.
Add to album—Select whether you want to save the
image to a certain album in the gallery. If you select Yes,
a list of available albums opens.
58
to select the right image
Options > Settings
(1600x1200
(1152x864 resolution) or
(640x480 resolution). If you want to
Print 2M - Large or Print 1M -
Show captured
captured image after it is taken, or
continue taking pictures immediately.
Default image name—Define the default name for the
captured images.
Extended digital zoom
(continuous) allows the zoom increments to be smooth
and continuous between digital and extended digital
zoom, On (paused)
at the digital and extended digital step point, and
allows a limited amount of zoom while retaining the image
resolution.
Capture tone—Select the tone you want to hear when you
take a picture.
Memory in use—Select where to store your images.
Restore camera
values to the camera settings.
Flash
MMS
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
image—Select On if you want to see the
Off if you want to
(main camera only)—On
allows the zoom increments to pause
settings—Select Yes to return the default
Off