Log; Call Waiting; Monitor All Communication Events - Nokia N81 User Manual

Call waiting

You can answer a call while you have another call in
progress if you have activated
Settings > Phone
To answer the waiting call, press the call key. The first call
is put on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press the end key. To end
both calls, select Options

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
Log > Recent calls. The device registers missed and
received calls only if the network supports these
functions, the device is switched on, and within the
network service area.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list.
114
Call waiting in
> Call > Call waiting (network service).
Options
> End all calls.
, and select Tools
Options > Clear recent
To clear an individual event, open a register, scroll to the
event, and press
Tools >
Call timers
To monitor the approximate duration of your incoming and
outgoing calls, press
timers.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
>
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See 'Phone and
SIM card', p. 119.
Packet data
>
To check the amount of data sent and received during
packet data connections, press
Log > Packet
your packet data connections by the amount of data sent
and received.

Monitor all communication events

Icons in Log
Incoming
.
, and selectTools
Options
, and select
data. For example, you may be charged for
are as follows:
> Log > Call
> Clear
Tools >