Sleep Mode - Nokia N81 User Manual

closing it. Also, select whether the keypad is locked when
closing the slide.
Opening the slide—To select whether incoming calls are
answered when opening the slide, select
incoming call or Call not
Closing the slide—To select whether active calls are
ended when closing the slide, select
Continue active call.
Keyguard activation—To select whether the keypad is
locked when closing the slide, select
slide or Off when closing
time when closing the slide, select

Sleep mode

Press , and select
mode to enable or disable the blinking LED in the power
saver mode.
Select Off to disable the power saver LED for the sleep
mode.
Enhancement
Press , and select
Enhancement sett.
in the power saver mode.
118
Answer
answered.
End active call
On when closing
slide. To receive a query every
Always ask.
Tools > Settings > General
Tools > Settings > General
to enable or disable the blinking LED
For enhancement indicators, see 'Essential indicators',
p. 15.
The available settings depend on the type of enhancement.
Select an enhancement and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
or to your device. See 'Profiles—set tones', p. 100.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to
answer is disabled.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
> Sleep
If you are using a
your device. To activate TTY, select
To activate the loopset, select
Yes.
Security
To edit settings related to the security, press
select Tools > Settings
>
and SIM card,
module.
Beep once or Silent, automatic
TTY or a Loopset, you must activate it on
TTY > Use TTY
Loopset > Use loopset
> General > Security
Certificate management, or
> Yes.
>
, and
> Phone
Security